Цитата:
2. New atomizer coll Installation:
When replacing the atomizer, whose atomizer resistance is larger than the previous one to some degree, resetting of the atomizer “base resistance” may be required - this is the resistance of the atomizer coil when it is at room temperature.
After fitting a new atomizer coil, press the power button while the tank is removed to initiate a reset. After you reinstall the tank, a message “New Coil Right, Same Coil Left” will appear on the display. Press the right regulatory button to confirm that a new coil has been fitted.
Should you see this message for any other reason - especially when reinstalling the same coil that is still warm from recent use - press the left regulatory button so that the “base resistance" is not reset.
Always remember to change the operational mode to suit the coil material that you have fitted to ensure that temperature control is accurate.
P.S. Перескажите кто нибудь, а то гуглопереводчик как то совсем криво перевёл.
