Даешь кайфуны в цветных PVD покрытиях! Или внешнюю оболочку из алюминия, покрытую толстым слоем кашымы! Оч красиво будет, только не представляю цену (:
Aeronaut with Lucid Cap, Velocity, Bellus, Freakshow Mini, SMPL, Evic VTC Mini, Reuleaux RX200
Мой модный, молодёжный канал на ТыТрубе, например
Вот Kashima тогда, например. Но, как я уже говорил, нужен люминь, ибо анодировка. Насыщенность/темность зависит от толщины слоя.
![]()
Aeronaut with Lucid Cap, Velocity, Bellus, Freakshow Mini, SMPL, Evic VTC Mini, Reuleaux RX200
Мой модный, молодёжный канал на ТыТрубе, например

Железо: IStik 50W + BY-ка XL v.4
Жижа: FA, TW Patriot, JoyeTech, Halo - (6mg)
~~~~~~~~~~~~~~~~~~~~~~~~~~~
ХОЧЕШЬ ПОХУДЕТЬ? СПРОСИ МЕНЯ КАК!

V2
[EN] The story continues between the years 2011 and 2012, when "SvoëMesto" caught the attention of a German, who happens to be a Russian native speaker as well and just recently had discovered vaping for himself. They got in touch on a Russian forum and started exchanging ideas. The goal was to introduce a completely new kind of vaping technology to the German market. A few months later a one of its kind kit was introduced in German forums via bulk order from Moscow.
The "SvoëMesto V 2.0" full kit included the Kayfun V2 and the Sëmovar V2. The Kayfun V2 could be assembled with several different tanks and a longmode, while the Sëmovar could be used as mechanical or as APV with Nivel chip. In this kit the modular and highly flexible design of SvoëMesto products became apparent for the first time. "SvoëMesto" became the name of the project driven by the Russian modder Sergey and the German gentleman named Eugen.
https://www.facebook.com/svoe.mesto/...levant_count=1
V3
[EN] After successfully introducing the Kayfun V2 to the German vaping community, the next logical step was clear: Taking the production to Germany and German standards. While it was still unclear, where to manufacture a stainless steel version, suddenly a forum post in ERF (German ECF) appeared. A German engineer had built his own version of the Kayfun made from stainless steel in comparison to chrome plated brass the V2 was made from, because he couldn't get his hands on an original Kayfun. Eugen immediately got in contact with him and shortly after Arkadi joined the team.
In late summer of 2012 the Kayfun V3 ES saw the light of day for the first time and the company SMtec GmbH was founded. Manufactured in Germany, the first batch covered 750 sets and was presented by a small selection of specialty retailers to the public. Due to its flavor profile and vapor production as well as the good reputation of its ancestor, the Kayfun V2, the Kayfun V3 ES quickly became a success.
The demand within the enthusiastic community in Germany eventually lead to a second batch adding another 500 devices to the series. Looking back, the Kayfun V3 ES, with 1250 devices in total, can be considered a rare collectors' piece. The first 1000 devices also had a serial number from 0-999. A new class of premium atomizers "Made in Germany" was born.
Its design should carry on in all following 22mm Kayfuns, such as the Kayfun 3.1 and the Lite series - until December 2014.
https://www.facebook.com/svoe.mesto/...e=1&permPage=1
3.1
[EN] Although the Kayfun V3 ES was a great success, it still left room for improvements. Especially more convenient refilling was a feature, customers kept asking for.
In February 2013 SvoëMesto introduced the Kayfun 3.1 in 3 colors:
alpha: sand and ceramic blasted
beta: sand blasted
gamma: brushed
All three version were coated with a nano layer of ceramic coating, which then was fused into the upper metal layer under high temperatures. The goal was redefining market standards with a grippy, scratch and fingerprint resistant surface.
Later on, 2 further surfaces were offered: delta (mirror polished) and brushed wihtout a nano layer.
Additionaly, the Kayfun 3.1 offered a new 3 segment tank as well as a fill valve, that enabled the user to fill the tank simply by pressing a certain type of bottle against it and squeeze the liquid in. After filling the valve would automatically close again and seal the pressure system.
The Kayfun 3.1 was made until late 2013 and has been the most recent premium model of Kayfuns - at least yet...
https://www.facebook.com/svoe.mesto/...e=1&permPage=1
Магазин SvoёMesto
Чую 24 будет представлен новый кайфун. Край конец месяца...
Тапком по экрану
Мои ништяки

Ноября
Тапком по экрану
Мои ништяки

Тут был спам
На сколько я понимаю, продажи стартанут одновременно в мире, соответственно подстраиватся под график выдачи зп в РФ не будут. Да и мое предположение - вилами по воде)))
Тапком по экрану
---------- Сообщение отправлено в 12:59 ---------- Предыдущее сообщение отправлено в 12:55 ----------
Кстати, svoemesto, тут лучше бы постить на русском... Имхо, но не все знают оч хорошо английский, форум то русскоязычный, дискриминация получается.
Тапком по экрану
Мои ништяки

"С мест сообщают"
the Kayfun V4 is in production and will come in December.
Regards
Alexander Epp
Svoemesto
SMtec GmbH
Peter-Panzer-Straße 41a
48351 Everswinkel
Telefon: Tel. +49 2582 2613399

Скорее всего, на католико-лютеранское Рождество или чуть раньше, в это время весьх Запад как сумасшедший носится по магазином за подарками.
Ну и есть время увеличить количество девайсов на складах.
Редко когда в году люди массово спускают столько денег.
Последний раз редактировалось YTLOW; 23.11.2014 в 15:17.

Тут был спам