Цитата:
Variable Wattage - Adjustable from 3W to 15W (0.5W increments)
Variable Voltage - Adjustable from 3.0V to 6.0V (0.1V increments)
Intelligent auto PCB when in VW mode to automatically calculate the correct output based on atomiser resistance
Bright blue 3 Digit LED display
510/eGo Threading
Chrome plated finish
Single IMR 18650 battery required for operation
4 AMP PCB limit
Check atomiser/cartomiser resistance
Check battery remaining voltage
Low Battery Indication
Check atomiser/cartomiser output voltage
Check battery output voltage
Reverse Battery Connect Protection
Atomiser/Cartomiser Short Protection
RMS and MEAN VALUE Switch
Great durable button which lights when in use and flashes when the battery is running low
Width: 21mm, Length: 118mm
И тут же:
Цитата:
To access the menu system simply press the activation button quickly 3 times, you will then be able to cycle the following menu by pressing the same button:
1. Uu – Voltage Up
2. Ud – Voltage Down
3. So – Standby (On/Off)
4. Uc – Check voltage of battery
5. Ds – Various Displays Sub-Menu
Do – Display atomiser/Cartomiser output voltage
Du – Display battery output voltage
Dr – Display atomiser/cartomiser resistance
6. LED On/Off
7. Voltage Power
Po: Constant Power operation
Uo: Constant Voltage operation
8. The old Zmax has 7 options and new Zmax (V2) has 8 options. The 8th option is the switch for “RMS” and “MEAN VALUE” , under RMS mode, the output will be done according to the RMS formular, and it needs special testing equipment (Mostly Germany users have this testing equipment to test the RMS). Under the Mean Mode, the general detecting equipment can be used to test the voltage output.
