eCigTalk.org - Powered by vBulletin



Страница 1 из 53 123451151 ... ПоследняяПоследняя
Показано с 1 по 20 из 1053

Тема: Evolv DNA 40

  1. #1
    Гуру Аватар для Lastluxury
    Репутация: 5134
    Регистрация: 29.04.2012
    Пол:
    Адрес: Moscow
    Сообщений: 8,733
    Записей в дневнике
    60

    Evolv DNA 40





    DNA 40
    The DNA system lets anyone build Evolv's patented power regulated technology into their own products.
    The DNA 40 is a power regulated digital switch-mode DC-DC converter for personal vaporizers.
    It features Evolv’s patented Wattage Control, Temperature Protection, Preheat, Step Up/Step Down Topology, Digital User Controls, OLED Screen, Onboard Buttons and Synchronous Rectification for maximum battery life and minimal heat generation.
    It is the most advanced personal vaporizer controller ever made.

    Official release date for the DNA 40 is Tuesday October 14th

    The DNA 40 is the same size as the DNA20D/30D.


    Specifications

    Temperature Protection
    The DNA 40 is the first power supply for electronic cigarettes to directly measure and limit the
    temperature of the heating coil during operation. By preventing the coil from becoming too hot
    regardless of fluid, wicking or airflow, a variety of undesirable situations can be prevented. For example,
    appropriate temperature settings will prevent the wicking material from charring, which compromises
    taste and introduces unintended chemicals into the vapor. Appropriate temperature settings will also
    reduce the breakdown of flavoring and base liquid components, which could impact taste or safety.
    Evolv’s Temperature Protection Technology requires a heating coil made from Nickel 200 alloy,
    rather than Nickel Chromium or Kanthal alloys. Nickel 200 is commercially pure nickel. It is often sold in
    vapor shops and online as “non-resistance wire.”
    If the temperature reaches the maximum value, the
    wattage applied to the atomizer coil is reduced to prevent overheating. Please note that the
    temperature reading is the average temperature of the atomizer coil, and care should be taken to
    construct the heating coil so that the temperature is uniform, without hot or cold spots. Ensure that the
    coil does not short to itself.
    Because wattage, not temperature controls vapor volume, large vapor volumes can be produced
    without unnecessarily high temperatures. Temperature Protection is most helpful if the atomizer begins
    to dry out, the user pauses during a puff, the beginning or end of the puff, or if the wattage setting is
    inappropriate for the attached atomizer.
    In normal operation, when the device is not firing the maximum temperature setting is
    displayed on the screen. When the device is firing, the actual average temperature of the coil is
    displayed on the screen.
    By default, the Temperature Protection setting is 450° Fahrenheit (232.22° Celsius). To change the limit
    1) Lock the device by pressing the Fire button five times.
    2) Hold down the UP and DOWN adjust buttons for two seconds.
    3) After two seconds, the maximum temperature will be displayed, and the UP and DOWN buttons
    should be released.
    4) Use the UP and DOWN buttons to adjust the maximum temperature
    5) When the display shows the desired maximum temperature, press the Fire button to exit
    temperature adjust mode.
    The maximum temperature is adjustable between 200° Fahrenheit (93.33° Celsius) and 600° Fahrenheit (315.56° Celsius). To
    disable the temperature protection entirely, adjust the limit up to 600 degrees, then press the UP
    button one additional time. The temperature limit will read OFF. This will also disable the prompt when
    a new atomizer is attached.

    Preheat
    When the DNA 40 is used with a temperature sensing atomizer, an additional feature called
    Preheat is activated. No vapor is produced when the temperature is below the boiling point of the
    liquid. Preheat applies extra power until the heating coil is up to operating temperature to shorten the delay between pressing the fire button and generating vapor.
    Because the preheat is temperature based, it will not overheat or burn the vapor.

    Attaching a New Atomizer
    The DNA 40 uses the resistance of the atomizer to calculate the temperature of the heating coil.
    It continually looks to see whether a new or changed atomizer has been connected. If you are using
    temperature protection, be careful to only attach new atomizers that have cooled to room temperature
    to the device. If a new atomizer is attached to the DNA 40 before it has cooled down, the temperature
    may read and protect incorrectly until the new atomizer cools.
    When you connect a new atomizer or disconnect and reconnect your existing atomizer, the DNA
    40 will prompt you to confirm this change. When you fire the first time, before activating the DNA 40
    will prompt “New Coil? UP YES/DOWN NO”. When you see this prompt, if you have attached a new
    atomizer, press the UP button. If you have disconnected and reconnected the same atomizer, press the DOWN button.

    For manufacturers outside the United States, the DNA 40 is available as a special order with
    Celsius units instead of Fahrenheit.


    Operation
    Basic operation of the DNA 40 is as follows. To wake the device from power off state, tap the
    Fire button. To generate vapor, press the Fire button. To change the wattage setting for more or less
    vapor, click or hold the Up and Down buttons.

    Display
    The DNA 40 has a small .69” diagonal blue OLED screen. The screen is attached to the main
    board by a flexible cable, allowing freedom in the design of your device. Please use caution when
    handling the screen and design the device so that the cable will be secured or strain relieved in
    operation. The normal and special operating modes shown on the display are discussed below. The DNA
    40 will automatically detect whether a temperature sensing (Nickel 200) or standard (Kanthal etc) coil is
    attached.


    Temperature Protected



    Watt setting: The power level currently set on the DNA 40.
    Battery indicator: The current state of charge of the battery.
    Temperature display: When not firing, the maximum heating coil temperature setting. While firing, the
    actual temperature of the heating coil is displayed.
    Ohms display: The resistance of the atomizer attached to the device. This is measured only when the
    unit is supplying power to the atomizer. At other times, it shows the most recent measurement.

    Non-temperature Protected



    Watt setting: The power level currently set on the DNA 40.
    Battery indicator: The current state of charge of the battery.
    Volts display: The output voltage being supplied to the atomizer.
    Ohms display: The resistance of the atomizer attached to the device. This is measured only when the
    unit is supplying power to the atomizer. At other times, it shows the most recent measurement.

    Modes
    Locked mode: Pressing the fire button five times with less than .7 seconds between presses will cause
    the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not
    adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show
    “Locked, Click 5X”. To exit Locked mode, press the fire button 5 times.
    Stealth mode: While locked, holding the fire and down buttons simultaneously for five seconds will
    switch to stealth mode. In this mode the display is off. It will still show error and lock messages. To
    switch back to normal display mode, hold down the fire and down buttons simultaneously for 5 seconds.
    This setting is stored to internal flash memory, and remains if power is removed.
    Right Mode and Left Mode: While locked, holding the fire and up buttons simultaneously for 5 seconds
    flips the display. This allows for maximum flexibility in designing the mod, as well as accommodating left
    handed use. This setting is stored to internal flash memory, and remains if power is removed.
    Power Locked mode: Holding down both the up and down buttons for two seconds will place the device
    in Power Locked mode. In this mode, the mod will operate normally, but you will not be able to change
    the power setting. This mode prevents accidental power level changes due to the buttons being pressed
    while in a pocket. To exit Power Locked mode, hold the up and down buttons for two seconds.
    Max Temperature Adjust: From Locked Mode, holding down both the up and down buttons for two
    seconds will place the device in Max Temperature Adjust mode. Once this mode is entered, the max
    temperature will be displayed. The up and down buttons are used to adjust the max temperature. To
    save the new temperature setting and exit, press the Fire button.

    Error Messages
    The DNA 40 will indicate a variety of error states.
    Check Atomizer: The DNA does not detect an atomizer, the atomizer has shorted out, or the atomizer
    resistance is incorrect for the power setting.
    Shorted: The atomizer or wiring are short circuited.
    Weak Battery: The battery needs to be charged, or a higher rate battery needs to be used. If this
    happens, the DNA 40 will continue to fire the atomizer, but will not be able to provide the desired
    wattage. The Weak Battery message will continue to flash for a few seconds after the end of puff.
    Temperature Protection: The heating coil reached the maximum allowed temperature during the puff.
    If this happens, the DNA 40 will continue to fire, but will not be able to provide the desired wattage.
    Ohms Too High: The resistance of the atomizer coil is too high for the current wattage setting. If this
    happens, the DNA 40 will continue to fire, but will not be able to provide the desired wattage. The Ohms
    Too High message will continue to flash for a few seconds after the end of puff.
    Ohms Too Low: The resistance of the atomizer coil is too low for the current wattage setting. If this
    happens, the DNA 40 will continue to fire, but will not be able to provide the desired wattage. The Ohms
    Too Low message will continue to flash for a few seconds after the end of puff.
    Too Hot: The DNA 40 has onboard temperature sensing. It will shut down and display this message if the
    internal board temperature becomes excessive.

    Auto power down
    The screen will be at full brightness while firing. After 10 seconds with no button presses, the screen will
    dim. 30 seconds after the last button press, the screen will fade out and the device will go into sleep
    mode. To wake the device, press the fire button.

    External component recommendations
    The DNA 40 is a self-contained power regulator which does not require external components for
    its user interface. However, it does support the use of external interface components if desired.

    Fire button:
    Use a momentary on, normally open type switch or button. A standard pushbutton switch is
    appropriate. The switch is a logic function – all power switching is handled with transistors inside the
    DNA module, so the switch does not need to be rated for power. A waterproof or processed sealed
    switch is recommended.

    Up/Down buttons:
    The small onboard buttons labeled UP and DOWN allow the user to increase or decrease the
    power level in .1 Watt increments. The onboard tactile switches are waterproof and rated for 300,000
    actuations. However, they are designed to always be used with external actuators, not pressed directly
    with the fingers. Please make sure the actuator presses down on the button only, and does not rotate or
    drag the top surface. Alternatively, remote normally open type switches or buttons can be attached to
    the UP and DOWN mounting holes for customization.

    Battery:
    A single cell rechargeable lithium chemistry battery is recommended. Either a lithium ion or a
    lithium polymer type can be used. Any battery used should be rated for a MINIMUM of 16 amps
    continuous discharge current. High C rated lithium polymer or IMR cylindrical cells are strongly
    preferred. Make sure that all contacts and connections are capable of handling at least 16 amps.

    Charger:
    Evolv offers an accessory DNA Charger which is USB powered and provides a 500 milliamp
    charge current. Other chargers can also be used. The use on an onboard charger is optional – a
    removable battery will also work.
    Источник и доп. инфо.










    Current DNA40 платы и Devices For Sale

    This list is meant for devices you can actually buy. No lists, no "I make them in my garage whenever I feel like it" stuff. There are many nice devices of that nature, but it's not maintainable and new people cannot be easily pointed on where to accquire one.

    Evolv LLC
    Evolv LLC - Shop Now
    Vaporshark rDNA
    rDNA The Next Generation
    Vapor Flask
    Vaperev Shop - Vapor Flask - Devices
    Bap Dual 18650
    bap DNA 40 dual 18650 box mod – Vape Dojo
    Hana DNA40
    http://shop.hyperionvape.com/Hana-Mo...-2022DNA40.htm
    Hana Modz DNA 40
    Protovapor XPV
    XPV DNA-40D | Protovapor.com
    Stealth vape
    Evolv DNA 40 Dual Celsius / Fahrenheit
    Последний раз редактировалось Lastluxury; 13.06.2015 в 14:47.

  2. #2
    Пользователь
    Репутация: 30
    Регистрация: 06.07.2012
    Пол:
    Адрес: M
    Сообщений: 276
    Дата 14.10 подразумевает появление в свободной продаже для простых смертных на сайте эволва?

  3. #3
    Гуру Аватар для Andreez
    Репутация: 1874
    Регистрация: 14.02.2011
    Пол:
    Адрес: חֵיפָה
    Сообщений: 8,538
    Записей в дневнике
    7
    По ценам инфы нет? Интересно, по цене 30ки пустят, или все же дороже?

    ---------- Сообщение отправлено в 13:15 ---------- Предыдущее сообщение отправлено в 13:13 ----------

    Цитата Сообщение от k0balt Посмотреть сообщение
    Дата 14.10 подразумевает появление в свободной продаже для простых смертных на сайте эволва?
    Эта дата, по традиции, подрузумевает появления обычной для Эволва надписи, "currently out of stock"
    спойлер  

    продукция

  4. #4
    Гуру Аватар для vik7498986
    Репутация: 4279
    Регистрация: 25.01.2014
    Пол:
    Адрес: БЕЛАРУСЬ
    Сообщений: 4,929
    Записей в дневнике
    6
    отмечусь,что бы не потерять...

  5. #5
    Представитель магазина Corsair.su Аватар для VelviDer
    Репутация: 1763
    Регистрация: 06.11.2013
    Пол:
    Адрес: Ленинград
    Сообщений: 8,263
    C Омами, это они правильно придумали, а вот температуру всё-таки многие по Цельсию привыкли измерять..
    А то что 2 Ома максималка, это тоже минус..

  6. #6
    Гуру Аватар для Lastluxury
    Репутация: 5134
    Регистрация: 29.04.2012
    Пол:
    Адрес: Moscow
    Сообщений: 8,733
    Записей в дневнике
    60
    Цитата Сообщение от VelviDer Посмотреть сообщение
    температуру всё-таки многие по Цельсию привыкли измерять..
    For manufacturers outside the United States, the DNA 40 is available as a special order with
    Celsius units instead of Fahrenheit.

  7. #7
    Гуру Аватар для Andreez
    Репутация: 1874
    Регистрация: 14.02.2011
    Пол:
    Адрес: חֵיפָה
    Сообщений: 8,538
    Записей в дневнике
    7
    Цитата Сообщение от VelviDer Посмотреть сообщение
    А то что 2 Ома максималка, это тоже минус..
    Да нормально. 40 ватт на 2 омах мало кто может выдать. обрати внимание, что платка выдает 9 вольт по максимуму, а не 6-7 как все остальные.
    а вот "замер темпереатуры" - это ржака конечно.
    спойлер  

    продукция

  8. #8
    Вэйпер Аватар для Vinyard
    Репутация: 208
    Регистрация: 25.02.2011
    Пол:
    Адрес: MSK
    Сообщений: 1,183
    Насчет температуры интересный тренд пошел. Доктор Фарсалинос вчера объявил о сборе средств на новое исследование, в котором, в частности, он собирается рассмотреть вред от вдыхания пара в различных температурных режимах. Если внезапно окажется, что при определенной температуре и выше вред значительно увеличивается, то функция ограничения температуры на новом DNA40 будет весьма кстати.

  9. #9
    Представитель магазина Corsair.su Аватар для VelviDer
    Репутация: 1763
    Регистрация: 06.11.2013
    Пол:
    Адрес: Ленинград
    Сообщений: 8,263
    Цитата Сообщение от Andreez Посмотреть сообщение
    Да нормально. 40 ватт на 2 омах мало кто может выдать. обрати внимание, что платка выдает 9 вольт по максимуму, а не 6-7 как все остальные.
    Это да, предвзято я к этому придрался конечно

  10. #10
    Гуру Аватар для Andreez
    Репутация: 1874
    Регистрация: 14.02.2011
    Пол:
    Адрес: חֵיפָה
    Сообщений: 8,538
    Записей в дневнике
    7
    Нет ну господа, объясите мне, как можно просчитать темпеатуру спирали, не обладая данными о материале ее, массе, теплоповоднсти фитиля, теплповднсти жижи, кличестве жижи на фитиле и.т.д.... ну бред же. Результат будет +/- 100 градусов.
    спойлер  

    продукция

  11. #11
    Гуру
    Репутация: 334
    Регистрация: 09.06.2010
    Пол:
    Адрес: Короча
    Сообщений: 4,950
    чем же плата меряет температуру?
    ...интересно... серьёзно...
    Honor 20 PRO -чудная машинка

    Smokoff 901->KR808-D1-> Gripper +DNA12 ->Eleaf iStick 20W ->KBOX+Subtank

  12. #12
    Гуру Аватар для Andreez
    Репутация: 1874
    Регистрация: 14.02.2011
    Пол:
    Адрес: חֵיפָה
    Сообщений: 8,538
    Записей в дневнике
    7
    Цитата Сообщение от sluchatel Посмотреть сообщение
    чем же плата меряет температуру?
    Забита некоторая таблица. по ней, в зависимости от падения сопротивления спирали высчитывается показатель температуры. Какая точность измерения, учитывая что именение сопротивления при нагреве в районе сотых ома - я не знаю.
    Все вешенаписанное - мое ИМХО. Но ничего другого в голову не приходит.
    Последний раз редактировалось Andreez; 10.10.2014 в 15:42.
    спойлер  

    продукция

  13. #13
    Гуру
    Репутация: 334
    Регистрация: 09.06.2010
    Пол:
    Адрес: Короча
    Сообщений: 4,950
    Цитата Сообщение от Andreez Посмотреть сообщение
    учитывая что именение сопротивления при нагреве в районе сотых ома
    нда уж.... плюс\минус километр..

    ---------- Сообщение отправлено в 13:42 ---------- Предыдущее сообщение отправлено в 13:40 ----------

    кстати можно будет проверить без контактным термометром -нагрел спиральку, на экране 450F -навёл термометр, а там 1000С ...
    Honor 20 PRO -чудная машинка

    Smokoff 901->KR808-D1-> Gripper +DNA12 ->Eleaf iStick 20W ->KBOX+Subtank

  14. #14
    Гуру Аватар для Spongebob
    Репутация: 996
    Регистрация: 18.01.2014
    Пол:
    Адрес: Вёска у Маскве
    Сообщений: 3,850
    Записей в дневнике
    35
    Цитата Сообщение от Andreez Посмотреть сообщение
    Нет ну господа, объясите мне, как можно просчитать темпеатуру спирали, не обладая данными о материале ее, массе, теплоповоднсти фитиля, теплповднсти жижи, кличестве жижи на фитиле и.т.д.... ну бред же. Результат будет +/- 100 градусов.
    Элементарно.

    https://en.wikipedia.org/wiki/Resistance_thermometer

    Люблю я форумных икспердов.

    СПИРАЛИ ДЛЯ ИЗМЕРЕНИЯ ТЕМПЕРАТУРЫ – ИЗ НИКЕЛЯ!
    Releaux DNA200 / Dani Extreme V2 + MB GEM 2 / SQuape R[s] • VF + Prodigy RDA • VF Squonk + AP Nectar BF / Chalice III + коробка мехов-генезисов-баков (хомяк, с-сука!)
    Mrs. Lord's • Grant's Vanilla Custard • Cuttwood
    шпойлер  
    Заметки о DNA40 – Сэй ноу ту клонс!
    Horrow show, всё будет horrow show... Всё будет horror show, я это знаю.

  15. #15
    Гуру
    Репутация: 334
    Регистрация: 09.06.2010
    Пол:
    Адрес: Короча
    Сообщений: 4,950
    Цитата Сообщение от Spongebob Посмотреть сообщение
    Элементарно.
    т.е. спиралька она же и датчик и измеряемый объект?
    Honor 20 PRO -чудная машинка

    Smokoff 901->KR808-D1-> Gripper +DNA12 ->Eleaf iStick 20W ->KBOX+Subtank

  16. #16
    Гуру Аватар для Andreez
    Репутация: 1874
    Регистрация: 14.02.2011
    Пол:
    Адрес: חֵיפָה
    Сообщений: 8,538
    Записей в дневнике
    7
    Цитата Сообщение от Spongebob Посмотреть сообщение
    А теперь подставьте в формулы наши величины. Да еще имейте в в иду что калибровка как таковая недоступна в принципе.
    спойлер  

    продукция

  17. #17
    Гуру Аватар для Spongebob
    Репутация: 996
    Регистрация: 18.01.2014
    Пол:
    Адрес: Вёска у Маскве
    Сообщений: 3,850
    Записей в дневнике
    35
    Цитата Сообщение от Andreez Посмотреть сообщение
    А теперь подставьте в формулы наши величины. Да еще имейте в в иду что колибровка как таковая недоступна в принципе.
    Посмотрите видео, почитайте спеки и не пишите ерунды пожалуйста.

    Attaching a New Atomizer



    ---------- Сообщение отправлено в 13:45 ---------- Предыдущее сообщение отправлено в 13:45 ----------

    Цитата Сообщение от sluchatel Посмотреть сообщение
    т.е. спиралька она же и датчик и измеряемый объект?
    Разумеется.

    ---------- Сообщение отправлено в 13:47 ---------- Предыдущее сообщение отправлено в 13:45 ----------

    На самом деле, идея лежала на поверхности. Все гениальное – просто.

    Пацаны молодцы.
    Releaux DNA200 / Dani Extreme V2 + MB GEM 2 / SQuape R[s] • VF + Prodigy RDA • VF Squonk + AP Nectar BF / Chalice III + коробка мехов-генезисов-баков (хомяк, с-сука!)
    Mrs. Lord's • Grant's Vanilla Custard • Cuttwood
    шпойлер  
    Заметки о DNA40 – Сэй ноу ту клонс!
    Horrow show, всё будет horrow show... Всё будет horror show, я это знаю.

  18. #18
    Пользователь Аватар для dmlex
    Репутация: 58
    Регистрация: 17.06.2014
    Пол:
    Адрес:
    Сообщений: 356
    Цитата Сообщение от Andreez Посмотреть сообщение
    По ценам инфы нет? Интересно, по цене 30ки пустят, или все же дороже?
    +10$

    p.s.
    давайте каждый уже посмотрит видео, а потом уже будем вести дискуссию..

  19. #19
    Гуру Аватар для Lastluxury
    Репутация: 5134
    Регистрация: 29.04.2012
    Пол:
    Адрес: Moscow
    Сообщений: 8,733
    Записей в дневнике
    60
    Друзья, для кого я специально в спеках выделил жирно предложение о Evolv's Temperature Protection?!

  20. #20
    Гуру Аватар для Spongebob
    Репутация: 996
    Регистрация: 18.01.2014
    Пол:
    Адрес: Вёска у Маскве
    Сообщений: 3,850
    Записей в дневнике
    35
    Цитата Сообщение от Lastluxury Посмотреть сообщение
    Друзья, для кого я специально в спеках выделил жирно предложение о Evolv's Temperature Protection?!
    Не для форумных экспертов по всему на свете.
    Releaux DNA200 / Dani Extreme V2 + MB GEM 2 / SQuape R[s] • VF + Prodigy RDA • VF Squonk + AP Nectar BF / Chalice III + коробка мехов-генезисов-баков (хомяк, с-сука!)
    Mrs. Lord's • Grant's Vanilla Custard • Cuttwood
    шпойлер  
    Заметки о DNA40 – Сэй ноу ту клонс!
    Horrow show, всё будет horrow show... Всё будет horror show, я это знаю.

Страница 1 из 53 123451151 ... ПоследняяПоследняя

Похожие темы

  1. DNA - вариватт-плата от Evolve
    от Tonny в разделе Техническая часть
    Ответов: 2603
    Последнее сообщение: 15.07.2015, 04:40
  2. Evolv Kick
    от BOBAH в разделе Отзывы, обзоры, сравнение
    Ответов: 1035
    Последнее сообщение: 24.12.2014, 09:10
  3. OPUS от EVOLV
    от bot14 в разделе Отзывы, обзоры, сравнение
    Ответов: 90
    Последнее сообщение: 19.06.2012, 20:47

Метки этой темы

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  

Условия предоставления информации | Отказ от ответственности

© eCigTalk.org 2021